Tile Repair: Expert Tips For The Proper Cleaning And Repair Of Tiles

Expert tips for the proper cleaning and repair of tiles

Tiles offer not only a wide range of design options for the floor and wall decoration, but cut off excellent also in terms of durability, cleaning and care. Glazed and unglazed porcelain stoneware is virtually indestructable surfaces that can be cleaned even without special products. However, unglazed and polished tiles should be impregnated to better repel stains and dirt. Particularly allergy sufferers and families with small can benefit from a clean environment. You found the best tiles and a comprehensive consultation with tiles kemmler (https://www.fliesen-kemmler /beratung/gewusst-wie).

Tile cleaning - child's play

When cleaning a distinction of tiles in the initial cleaning of the cement veil resulting from the Grouting is removed and a special cleaner is necessary. Regular maintenance cleaning is possible with a simple household cleaner and water. To strong cleaning agents could work here even damaging for you and the surfaces of the tiles. With greater pollution a basic cleaning may be necessary but with special cleaners, increased reaction time and the use of a brush.

Tip: Generally any cleaners containing hydrofluoric acid and fluoride, should be used for tile cleaning, as these can damage ceramic surfaces even at high dilution!

Tile repair - how it works

Tile repair - here's how!

Although the tiles are very robust, you got to fight to not only with dirt, but also with correct damage. This repair is however not very difficult and can be done even with some skill. Appropriate repair kits ensure that corners chipped off, improperly drilled holes and small cracks magically disappear.

You need this for the tile repair:

Tile CleanerSponge or clothPainters maskingSpecial repair glue with 2-component epoxy resinDispenserPlastic spatulafine sandpaperTile paint

Step 1: After the broken tile has been thoroughly cleaned with a tile cleaner and a sponge or cloth, the corresponding tile will be taped with masking tape to protect the surrounding tiles.

Step 2: a special repair glue with 2-component epoxy resin is injected in the cracks or holes in the tile. Do this, push a thin layer of glue in the damaged area with the tip of the dispenser and then model the glue with a plastic spatula.

Step 3: the adhesive has dried (according to manufacturer's instructions about 2 hours), projecting on glue by using a fine sandpaper can be removed. This step should be careful, because the tile should not be sanded.

Step 4: The patched crack can now be removed with tile paint. To obtain the desired shade that you mix the base coat with a corresponding paint color. The paint should dry for about two hours and be applied, if necessary, several times, to get a perfect result. Note also the manufacturer's instructions.

The tile is too badly damaged and you still have spare tiles, they can also be replaced. To do this, you first remove the grout around the tile using a multi tool with milling attachment. Knock a hole in the middle of the tile, then remove the tile with a hammer and chisel from there. After cleaning the surface and a dispersion adhesive is applied, a new tile can be used and newly grouted.

Tip: To avoid damaging the surrounding tiles, the joint must be removed completely before removing the damaged tile. The surrounding tiles are also conserved by removing from the inside to the outside.

Conclusion: Initially somewhat more elaborate tiles laying pays off over time and is ideal not only for bathrooms and kitchens, but also for the living room, corridors and nursery, because cleaning and repair are fairly easy.

Copyright © Exzorders.com